LouCheng plate equipment use notice: do not understand LouCheng machine structure and the performance and operation procedures shall not start the machine, it is strictly prohibited to more than a small height, namely the sliding surface to work at the bottom of the face after the requirements of small distance 290 ㎜ mould clamping height and, top and bottom plate thick slab thickness, with background doesn’t allow more than 290 ㎜, molds should be designed according to this requirement, in order to avoid machine accidents.Always pay attention to the height of the lubricating oil in the sliding box and both sides of the body.Equipment should often wipe, keep clean, no mud and water.

In the design of high-rise steel structure of floor bearing plate equipment, steel-concrete composite structure is often used. In the high-rise with high earthquake intensity or very irregular, the form of adverse seismic core tube plus outer frame should not be chosen simply for economic reasons.It is advisable to choose the surrounding giant SRC column with the core as the structural system supporting the frame.More than half of such senior managers in China are the former.It is bad for earthquake resistance.In light steel industrial plant, when there is a large suspended load or moving load, it can be considered to give up the gantry frame and adopt the grid frame.In areas with high snow pressure, roof curves should be conducive to snow sliding (snow load should be considered at the tangent of 50 degrees), and similar consideration should be given to areas with high rainfall.When the building permits, placing supports in the frame is more economical than a simple nodal frame.