The molding part of the glazed tile equipment is driven by the hydraulic cylinder to move the mold up and down, and the color steel tile can be pressed into many sections, shaped like a glazed tile. The part of the cutter is driven by the hydraulic cylinder to move the cutter up and down, which can cut off the colored steel tiles. The glazed tile machine equipment has many parameter settings, which can be set with touch screen and text screen. There are two ways of parameter setting: equipment parameter and user parameter setting. The equipment parameters are: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. The part of the glazed tile equipment has a frequency converter drive motor, a hydraulic station motor, a pressure type with two hydraulic solenoid valves, and a cutter with two hydraulic solenoid valves.

The working table of the glazed tile pressing machine equipment has six processes, (ie, the hexagonal runner). In addition to the first-level mechanical indexing and positioning, there is also a set of precision positioning mechanisms to ensure that every time the stamping process, work The accurate positioning of the table die, the slide table on which the upper die is installed is a box structure, the slide rail and the upper rail of the fuselage have a large contact length, and each time the upper die is stamped, the process has a second stamping of the mud billet, that is, the upper die and the second press After the tile blank is in place, the upper mold rises by 10 mm, and after the mud blank is fully exhausted, the upper mold presses the tile blank down into place again before returning to the high position, so the mold has a long service life.