The double layer roll forming machine is economical. It can combine two types of equipment into one, saving floor space. The cost of the double layer roll forming machine is much lower than that of two single layer machines.
The double layer roll forming machine adopts a new double-layer scheme, one machine for dual purposes, small footprint and convenient transportation.
This machine adopts a brand-new double-layer design, one machine for two purposes, small floor space, convenient transportation and cost saving. Our factory has perfect after-sales service, can carry out special planning and production according to the needs of users, and guide users in joint production, installation, debugging and maintenance.

Defect: The main body of the equipment is the motor and pump station. It is impossible to produce plates together. In the case of large processing volume, it is difficult to meet customer needs for roll forming machines. It is suitable for small and medium-sized cities and small and medium-sized enterprises with small processing volume.

The scope of application of double layer roll forming machine: In order to adapt to the two layers of the product, the die also has two layers. The processing equipment behind the die must be adjusted up and down to adapt to the exit height of the two plates. The appearance of the double-layer color steel forming machine greatly saves space, and the time to replace the two types of plates has also become shorter, which has also increased the output rate. At the same time, due to the relative crowding, it is difficult to install the auxiliary roller frame, and it is difficult to adjust and check the molding condition.

Several major maintenance of double layer roll forming machine:

1. Hydraulic components: cleaning agents cannot be used;

1. Clean hydraulic components (base plates, valves, motors, pumps, pipes, etc.) monthly to prevent dust from entering the system. Check whether there is any deformation in the bending part of each tube of the roll forming machine

2. After using the new machine for one month. If it is abnormal, it should be replaced. After two months of use, the connections of all accessories should be tightened, and the system should be shut down during this work period to make the system pressure-free.

2. Filter: replace or clean the filter;

1. Change the oil every time. Check and clean every three months,

2. The air filter on the fuel tank. It is best to replace it within 1 year.

3. The machine has related alarms or other filter abnormalities such as dirty oil.

Liming Stamping and Forming Machinery Co., Ltd. established a roofing machinery manufacturer based on roofing and wall panels at home and abroad, and installed roof panels of various profiles in its own workshop. Therefore, any customer who needs galvanized and color-coated roof and wall panels can contact LIMING roll forming machine. The double layer roll forming machine has many advantages, including:
Save floor space
longevity
Cost-effective
Higher quality materials