The reason for the paint scratching of the tile press machine is mainly related to the pre-commissioning. Generally speaking, for the purchased tile press equipment, the color steel tile press manufacturer will send commissioning personnel to assist in the operation and commissioning. If the problem is in the wrong debugging, you can directly contact the color steel tile press machine manufacturer to adjust and test again until the problem is solved;

The reason why the tile pressing machine causes the bottom wheel to paint is the problem of the bottom wheel. On the one hand, it may be affected by some extra things. Imagine that some unrelated debris is shaking next to the high-speed bottom wheel, how can it not be a problem? On the other hand, the reason why the distance between the wheels is too narrow leads to excessive friction. If this is the problem, how to solve the problem of wheel paint on the bottom of the tile press? Very simply, the gap between the upper roller and the lower roller should be increased. Generally speaking, when the gap is increased, the friction will be reduced, and the problem of paint will be solved naturally.

There is another reason that may cause paint scratches. Some color steel tile presses will loosen and sway back and forth after a long period of operation, which is the result of larger deviations. If it is for this reason, it can be resolved by reducing the deviation.

The color steel tile press manufacturer warmly reminds all the friends who operate the tile press machine, if there is a case of bottom wheel paint, don’t panic. The first thing to do is to check the problem and make a check record, so that the debugger can make debugging reference. In

addition, we must pay attention to protect the color steel tile press equipment during use to reduce the probability of problems.