The safe operation of the roofing panel roll forming machine is very important. This is not only a prerequisite for ensuring the normal operation of the machine, but also a guarantee for the production safety of workers.

When it is necessary to adjust to the roofing panel roll forming machine, the power supply must be cut off first. When overhauling each part of the roofing panel roll forming machine to make up the moving parts, pay more attention to the safety of the hand. Before starting the operation of the roofing panel roll forming machine, you must first observe whether the connection of the various components of the roofing panel roll forming machine is tight. Whether the nuts, bolts, and nuts are loose and not locked. And before starting the machine for trial operation, add enough lubricating oil.

During the start-up operation, it is necessary to observe the part of the roller shaft rolling component, whether there are abnormal vibration chucks, noise, and whether the movement of each component is coordinated. Only after all the parts are normal can the batches and batches be accelerated to produce plates. In the process of high-speed production and operation of the tile press, if irregular equipment is found to be abnormal, the operator should be immediately cut off the power supply and shut down for inspection.

The thickness of the steel frame of the roofing panel roll forming machine is the rated thickness Q235 steel plate of the rack lathe, and the steel used must be a steel plate with no hard marks, welding slag, and welding seams are not allowed to be too thick. The rotating parts of the machine tool roller assembly should be lubricated regularly. The operator should refill the lubricant once a week. The mechanic adds lubricating oil to the rotating bearing part every six months, which can better ensure the long-term non-destructive application of the tile press equipment.