In the process of using cold bending forming equipment, it is necessary to install it first. What should we pay attention to when installing cold roll forming machine?

(1) First of all, in order to facilitate the maintenance of the operation, please keep it more than 50cm away from the wall;

(2) Then precision adjustment: the machine frame must be level corrected to maintain the precision;

(3) Secondly, the following items are important for the installation foundation: A strength must be able to randomize the weight B base ground must be level;

(4) Installation of cold-bending forming equipment needs to refer to the instruction manual;

(5) Then have a place with good power supply;

cold roll forming machine needs continuous maintenance to ensure the normal operation and service life of the machine. Today, we will briefly introduce the maintenance work of the oil tank part of the cold roll forming machine:

1. Check the oil level of the oil tank every week. If the hydraulic system is repaired, it should also be checked. If the oil level is lower than the oil window, hydraulic oil should be added;

2. The oil temperature of the system should be between 35°C and 60°C, and should not exceed 70°C. If the temperature is too high, it will cause the deterioration of the oil quality and accessories;

3. The new machine should be changed after 2000 hours of operation, and after every 4000-6000 hours of operation, the oil should be changed. Each time the oil is changed, the oil tank should be cleaned;