1. Regularly inspect and maintain electrical equipment as required. Unused electrical equipment wiring must be completely removed.

2. The operation of the power outage department, when the distance from the electrical inspector is 0.9 meters, must use dry wood rubber or insulating material for reliable temporary blockage.

3. There are protective measures to prevent electric shock when using electric tools.

4. When using a ladder, the angle between the ladder and the scene should be 60 degrees. When using the ladder in the cement scene of the color steel tile forming machine, anti-skid measures must be taken and someone must support the ladder.

5. When it is found that any conductive part of the color steel tile forming machine is grounded, all personnel except the rescuer of the electric shocker shall not enter before the power is cut off, and it is 4 meters away from the room and 1.8 meters away from the room to avoid Step voltage damage.

6. Electricians must understand the types and functions of circuits and electrical equipment in the workshop, and do not fully understand the functions of electrical equipment. It is forbidden to engage in dangerous operations.

7. Electricians should check the condition of cables, motors and electric control consoles every day. If problems are found during the inspection process, they must be dealt with in a timely manner. When checking the temperature of the motor of the color steel tile forming machine, please check whether there is no electricity before the test on the back of the hand.

8. Except for temporary building electricity or temporary measures, the color steel tile forming machine is not allowed to install temporary wires, hanging lights, meters, tools and welding machines, as well as switches and sockets used. Unauthorized changes to the original wires are not allowed.