First, before each start-up operation, you need to check whether the connection of the C/Z interchange purlin is reliable, whether the related bolts, nuts, etc. are tightened. It is necessary to know that the bolts and nuts are loose and fall off, which may affect the Operation during production and processing.

Second, before production and processing, make sure that there is enough oil in the purlin equipment case so that the equipment can be powered on to run.

Third, because there may be some differences in the purlin size, shape, and specifications during each production process, you need to understand the processing requirements before each operation, and then pay attention to the placement of the mold to ensure that the surrounding gaps are uniform. And there is enough space during the operation.

Fourth, when installing the mold, it is necessary to block the power supply. At this time, it is necessary to carefully move the motor belt or the corresponding large gear, so that the mold can be better installed.

Fifth, in the daily production and processing process, you must close the electrical cabinet and junction box of the C/Z interchange purlin to avoid the phenomenon of dirt accumulation. It is recommended that you regularly check the corresponding joints to avoid oil leakage. .

Sixth, it must be checked at regular intervals whether the charging pressure of the accumulator meets the requirements, whether there is any abnormal phenomenon in the capsule. Once the problem is found, it must be dealt with in time. In addition, the operating voltage needs to be kept stable during the operation process, remember not to Let the fluctuation value exceed the rated voltage of C/Z interchange purlins by about 5%, and the maximum fluctuation value cannot exceed 10%.

In addition, if the C/Z interchange purlin has a problem, it must be notified to a professional technician for repair, and the operation can be restarted after the fault is eliminated. The relevant operator cannot perform repairs without permission, to avoid causing greater fault problems. appear. I hope you will pay more attention to safety during the use of this type of equipment to ensure that the safety of staff and the quality of materials are reliably guaranteed.