Light
steel keel roll forming machinewall material 50, 75, 100, 150 and several light steel keel
roll forming machine thickness from 0.4mm to 1.0mm range.Under normal
circumstances, most people will choose light steel keel, with thin gypsum board (0.90cm) using
thin keel (0.60mm-0.80mm), gypsum thick (0.95cm-1.50cm).

Thick keel (1.0mm-1.20mm).The ceiling keel
consists of the keel (main keel), the cover keel (auxiliary keel) and various
accessories.D38 (UC38), D50 (UC50) and D60 (UC60) three series.D38 for hanging
point spacing 900-1200 mm not on the ceiling, D50 for hanging point spacing
900-1200 mm Master ceiling, D60 for hanging point spacing 1500 mm Master
heavier ceiling, U50, U60 for the cover keel, With the use of keel.The wall
keel consists of a cross keel, a vertical keel and a crossed keel and various
accessories.

The width of the four series light steel keel roll forming machine with Q50 (C50), Q75 (C75),
Q100 (C100) and Q150 (C150) are usually used Called keel type, such as the
width of 50mm keel is called 50 keel.Light steel keel roll forming machine side of the high known as the
keel side of the high, keel length is divided into 3 meters, 3.5 meters, 4
meters, etc., but also can be customized according to the height of any site.

If
you want to know more detail about the “Light steel keel roll forming machine roll forming machine”,you’re
welcomed to contact with Dan.

Whatsapp:+8615716892381

E-mail:horseamachine03@chinaformingmachine.com