The split or block installation method of the composite plate tile pressing machine The split or block installation method means that the grid is divided into strips or blocks, which are hoisted by the lifting equipment to the high-altitude design position and placed in place, and then integrated. installation method.

Strip means to divide into several sections along the long span of the grid. The width of each segment can be from one grid to three grids, and its length is the span of the short span of the grid. Blocky means that the unit shape divided in the vertical and horizontal directions of the grid is rectangular or square. The weight of each unit of the composite panel tile press is based on the lifting capacity of the existing lifting equipment on site.

The composite panel tile pressing machine’s split or block installation method Most of the welding and splicing work is carried out on the ground, which is conducive to improving the quality of the project and can save most of the assembly bracket. Since the split order has taken into account the capacity of the existing lifting equipment on the site, the existing equipment on the site can be fully utilized to reduce the rental fee of the lifting equipment. The high-altitude bulk method of the composite board machine refers to the small unit or part ( (Single member and single node) The method of direct assembly at the design position.

The high-altitude bulk method of composite panel tile press has two types: full support (that is, full hall scaffolding) method and cantilever method. The full bracket method is mostly used for assembling parts, while the cantilever method is mostly used for the assembly of small units at high altitude. Because the parts are assembled at high altitude, no large lifting equipment is needed, but because of the large-scale assembly bracket, a lot of scaffolding materials are needed.