Before using the glazed tile roll forming machine, it is necessary to check whether the various components of the roller assembly are locked tightly. After the connection between the bolt and the nut, ensure that the lock is not loose. Only then can the commissioning of the glazed tile machine be started.

Only after assembling each part properly can the mold be assembled. In the process of assembling the mold, it is necessary to ensure that the power supply is cut off, and the chain and sprocket are manually assembled with the motor to assemble the roller assembly of the body molding host. When installing the spindle, two people need to cooperate to avoid unnecessary wear and wrong installation.

The mold assembled by the glazed tile roll forming machine is composed of the above mold and 6 lower molds of matching sizes. The first is the matching of the upper and lower molds, and the lower mold is fixed to the work table. Configure a certain prepared backing plate. After the upper mold and the lower mold are fixed, check whether the gap between the upper and lower mold shears has reached the required tile thickness of the glazed tile roll forming machine . If it is correct, the remaining upper and lower molds can be assembled by this, and after the overall assembly is completed, the overall test machine inspection is performed.

Before the official start-up, pay more attention to whether the lubricating oil in the transmission parts such as chains and sprockets is sufficient. After starting the machine, check carefully whether the glazed tile roll forming machine has unusual conditions such as abnormal noise and friction when it starts running. operation between the connecting parts is smooth and error-free.