Many new customers of color steel tile pressing machine and composite plate machine are indistinguishable, and it is a concept. I briefly introduce two sentences! The tile press is the iron sheet directly rolled through the tile press and used as a simple building roof and roof. The compound machine is a set of assembly lines, including tile press/composite host/cutting system. The pressed product is called sandwich composite board. As the name implies, the upper layer is made of iron, the middle layer is made of foam or rock wool and glass wool. Has the advantages of thermal insulation and sound insulation.
Find the center of the first row and the last row of the color steel tile equipment, then tighten the lock nuts on both sides, draw a straight line in front of and behind the center of the middle wheel, and adjust the gap between the upper and lower shafts. Adjust the machine in a straight line. Debugging method for the deviation of the pressure plate of the tile pressing machine, such as the plate runs to the right, pads the left corner (feeding frame), or falls on the right side (the number of axes runs off the bottom of the number of axes, the upper axis falls with the bottom axis).
The tile press machine is made of high-strength steel plate after cold pressing, with uniform wall thickness, adjustable size and large compression strength. After forming by cold bending, the C-shaped steel is light in cross-section. But it is very consistent with the stress characteristics of the roof sandalwood strip, so that the mechanical efficiency of the steel is fully exerted. The C and Z steel sandal strips can reduce the weight of the building roof. Reduce the amount of engineering steel. Therefore, it has become a cost-effective steel. It is a new type of building material that replaces traditional steel sandal bars such as angle steel, channel steel, and steel pipes. The use of C-shaped steel sandal strips and light metal tiles is the best choice for light steel construction.