The fully automatic C-shaped steel machine is a galvanized sheet rolling forming unit that can roll and produce various specifications of C-shaped metal purlins. Its main use products can be used as the main force-bearing structure of large and medium-sized industrial civil buildings. The C-shaped steel machine is mainly composed of an uncoiler, a feeding device, a leveling device, a punching device, a roll forming host, a straightening device, a hydraulic shearing system, a hydraulic pumping station system, a computer PLC programming control operating system, a discharge table, etc. Composed of a series of cold bending machine devices, this fully automatic C-shaped steel equipment uses high-level industrial control software to achieve fixed-length and fixed-length cutting, automatic punching, and the entire unit system has excellent system performance and high degree of automation. It also has the characteristics of good maintenance and easy maintenance in the later period of operation.

The operator of the fully automatic C-shaped steel equipment is familiar with the main structure, performance and usage of the machine. For those who do not understand the structure and performance of the tile press and do not know the operating procedures, do not start the machine without permission to avoid accidents. In the process of use, pay attention to the height of the lubricating oil in the sliding box and the body on both sides. If you find that the machine is not operating normally, you should immediately cut off the power and shut down to check. The equipment is regularly checked and repaired, and must be wiped frequently to keep the machine clean and free of mud and water.