The glazed tile machine is divided into three parts: roller forming part, pressing part and cutting part.The forming part of the roll table is driven by the motor, and the chain drives each roll to rotate.The pressing part is driven up and down by the hydraulic cylinder, which can press the colored steel into many sections, shaped like glazed tiles.The cutting tool part is driven up and down by the hydraulic cylinder, which can cut off the colored steel tile.The production process of glazed tile press is as follows: the colored steel plate enters the forming part of the roll table, after forming to the pressing part, pressing into the equidistance – section – section, the cutter is responsible for fixed-length cutting.

The characteristics of the control system of glazed tile machine: the control system is simple to operate, and the normal automatic production does not need to go backwards first, but one – step forward, pressing, cutting is completed.High precision, each piece of shear accuracy is less than 0.1mm, meet the process requirements.The program runs stably and reliably.The executive part has the frequency converter drive motor, the hydraulic station motor, the cutter’s two hydraulic solenoid valves.The test part of glazed tile machine includes: pulse encoder to test the length of color steel tile, up and down travel switch of pressure type, up and down travel switch of cutting tool, up and down operation button of pressure type, up and down travel button of cutting tool, emergency stop switch, hydraulic start and stop switch, etc.