Color steel tile press maintenance should be noted: 1. color steel tile press maintenance must implement the “maintenance and repair, prevention first” principle, do regular maintenance, mandatory, correct handling of…

The glazed tile machine is divided into three parts: roller forming part, pressing part and cutting part.The forming part of the roll table is driven by the motor, and the…

1, the inversion of tile press workbench is installed on the shaft end gear set, dial pin gear transmission, toggle mounted on the six-party turn sheave on the shaft to…

Liming Roll Forming Machinery Co., Ltd. has a place in the field of rolling shutter machine manufacturing in China. The production and manufacturing level has established a long-term and stable…

Ten years ago, “keep up with the pace of the times” has become a buzzword. And people from the “basic necessities of life,” these four areas continue to follow the…

1. Lifetime of the light steel structure: 100 years( 0.85-1.2mm, Z275 galvanized steel profile, strength: 550Mpa) 2. Earthquake resistence: more than 9 grade, Wind resistence: more than 50m/s, 225km/160MPH 3.…

Firstly, the characteristics of the control system of the tile press are introduced: 1. The operation of the control system is extremely simple. In the normal automatic production process, there…

Compared with imported tile presses, domestic tile presses are more detailed in terms of parts and components produced by foreign tile presses. The rollers and rollers may have higher hardness,…

Fire shutter doors are usually located in large openings in the building, in the event of a fire fire and prevent smoke from spreading.The door is open and closed and…

The shutter door ACTS as a curtain and thus provides adequate protection and security against fire and theft.The door is strong enough to provide adequate security for the glass and…