admin

The car panel equipment is composed of a discharging device, a forming roller main shaft, forming cutting, a computer hydraulic system, and a finished product feeding device. Each box plate machine will be equipped with a set of lubrication system.…

The greenhouse skeleton equipment is mainly a kind of greenhouse that is made of greenhouse rods, pressure rods, columns, and arches to cover the plastic film. Its shape is an arched round plastic greenhouse. It occupies a large area and…

The matters needing attention when using C-beam machine are as follows: 1. The reinforcement design should be adapted to the geometry of the original components to facilitate construction. 2. Pay attention to the clearance restrictions during the reinforcement of the…

The reason why the color steel plate is recognized and popularized by a large area is that the key factor is the good waterproof performance of the color steel plate. In some areas of our country, especially in the northwestern…

Maintenance: 1. Operate in strict accordance with operating rules; 2. Add lubricating oil regularly, fixed point and quantitatively according to the requirements of the lubrication chart before starting the machine, and the oil shall be clean without precipitation; 3. The…

Everyone knows that high-quality light keel machines produce high-quality products. If you don’t know enough about this, don’t buy blindly or try to buy a cheap keel machine. Although the cost is temporarily saved, the machine will later There are…

The raw materials used for the production of profiles by the keel machine are mainly strip steel, and various shapes of profiles are made through a series of processes such as cold rolling. The produced keels include: light steel keels,…

1. Different types Light steel structure is a young and vital steel structure system. The steel structure is a structure composed of steel materials and is one of the main types of building structures. The structure is mainly composed of…

I believe many people are very unfamiliar with the term roofing. In fact, roofing is not a roof, but only a part of the roof.Many buyers buy the roofing sparsely. I only know that I need it, but I don’t…

1. Light weight; the density of aluminum is 2.73g/cm³, only 1/3 of steel. 2. High strength; high strength can be achieved through ingredient configuration, processing and heat treatment methods. 3. Corrosion resistance; with self-rust prevention ability, the formed oxide layer…

1. Before starting the motor, the reversing valve should be in the middle position to prevent motor overload. 2. The working pressure adjusted by this pump shall not be arbitrarily raised. 3. The working fluid of the oil tank of…