The Ang Chi tile press machine is produced by the wet method of glazed tiles, so when cutting, the vacuum screw extrusion mechanism is often used to ** shape press the village tile blank. However, this type of tile press also has some bad features, such as the complicated structure of the connecting rod suspension, many parts, high cost, and time-consuming assembly. However, when the tile press is in operation, its requirements are more than independent suspension. The frame has good durability, and can always maintain the characteristics of the connecting rod without deformation or displacement.

Angle Chi tile press is an efficient and economical profile, so it can make the cross-sectional shape more reasonable, so that the processed steel can play a higher efficiency, thereby improving its carrying capacity. It is different from the ordinary I-type tile press, which widens the H-shaped wing show, so it is parallel on both the inner surface and the outer surface, which is also convenient for many high-strength snails and The connection of other components makes its size composition more reasonable and complete, so that workers can have more choices when processing and using.

In the production process of the Ang Chi tile press machine, it is inevitable that one or other problems will occur. The most common problem is the deviation of the color steel plate. Once the deviation occurs, it will affect the production efficiency and product qualification rate of the machine, so we must To understand how to correct these errors, after a long period of research and exploration, we came up with a method to adjust this problem: if the device board runs to the right, you need to use an iron block to the left corner, or roll the right If the shaft is flattened, the number of shafts running off will be the same. The upper roller should be the same as the lower roller.